Licensed & insuredAvg. response 45 minutes★★★★★4.9 from 300+ local jobs
Gas line repair and installation in Santa Cruz keeps your furnace, water heater, and stove running. Whether you've got a slow leak, a bad connection, or you're adding a line to a new appliance, a bad gas line isn't something to wait on. The smell alone tells you something's wrong, and that's when you need a plumber who knows how to find and fix it safely.
Santa Cruz homes run the full gamut: Victorian bungalows in Downtown with original iron lines, newer construction in Scotts Valley and Felton where plastic lines were run, and everything in between around Capitola, Aptos, and Watsonville. Soil here is rocky and acidic in spots, which corrodes old metal lines from the outside in. Salt air near the coast speeds that up even more. We see leaks at connections, pinhole corrosion in buried sections, and damage from foundation movement that's common in this area. A camera inspection tells us exactly where the problem lives.
Once we locate the leak or damage, we either seal the connection, replace the bad section, or reroute the line away from soil that's eating it. Everything gets pressure-tested before we leave. If you're installing a new line for a fireplace, heater, or cooktop, we run it to code and make sure it's protected and accessible. We show up in about 45 minutes, diagnose on the spot, and talk you through the fix before any work starts. No surprises, no invoice until you approve it.
When to call us
You smell rotten eggs or sulfur near your appliances, meter, or outside gas line
Gas bills jumped without a change in use
You hear hissing at a connection or near the meter
A gas appliance won't light, or the pilot keeps going out
You see corrosion, moisture, or discoloration on a visible gas line
Gas line repair & installation jobs we handle in Santa Cruz
Leak detection using pressure test and gas detectors
Full inspection of connections, valves, and fittings
Camera inspection and line locating (buried or concealed lines)
Repair or replacement of corroded or damaged sections
New line installation for appliances (water heater, stove, fireplace, heater)
Pressure testing after any repair or installation to confirm safety
Not sure which one you need? Call and describe what's going on. We'll confirm the scope and give you a free, no-obligation quote before any work starts.
Common questions
Can I smell gas safely, or should I leave the house?
If you smell gas, leave the house right now and call us from outside or a neighbor's place. Don't use electrical switches, light a match, or touch anything that could spark. Gas leaks are serious. Get out first, call second. We'll come right away.
Do you install new gas lines for appliances I'm adding?
Yes. We run new lines to code for water heaters, stoves, fireplaces, grills, and heaters. We size the line to the appliance, secure it properly, protect it from damage, and pressure test it before you use it. If you're replacing an old appliance, we can often use the existing line if it's in good shape.
What causes gas lines to fail in Santa Cruz?
Corrosion is the biggest culprit. Salt air accelerates rust on metal lines, and acidic soil eats through them from the outside. We also see leaks at old connections that have vibrated loose, and damage from tree roots or foundation settling. Older homes sometimes have brittle iron lines that crack under pressure changes.
How long does a gas line repair usually take?
A simple connection leak or regulator fix usually takes an hour or two. Replacing a section of line can take 2 to 4 hours depending on where it runs and whether it's buried. We'll give you a time estimate after we inspect the problem.